150 x 150 x 700 Beam Mould in Rohtak

Product Overview

The 150 x 150 x 700 Beam Mould in Rohtak is a concrete testing accessory used to cast rectangular concrete beam specimens for flexural strength testing. It is suitable for civil engineering laboratories, construction quality control departments, infrastructure projects, educational institutions, and concrete testing facilities that require consistent specimen preparation.

The mould helps maintain the required beam shape and dimensions during casting and initial setting. Correct mould preparation and specimen handling are important for obtaining dependable test results. Civil Testing Equipment offers concrete testing equipment for laboratories and construction professionals looking for suitable testing solutions.

Purpose and Working Principle

A beam mould provides a fixed cavity into which freshly mixed concrete is placed and compacted. After the specimen has set sufficiently, it is removed from the mould and cured according to the applicable testing procedure before being tested in a flexural testing machine.

The 150 x 150 x 700 Beam Mould in Rohtak is intended for preparing concrete beam specimens with nominal dimensions of 150 mm × 150 mm × 700 mm. The specified specimen size should always be selected according to the applicable test method, laboratory requirements, and aggregate characteristics.

For reliable testing, the mould should be clean, correctly assembled, adequately supported, and checked for leakage or visible damage before each use.

Key Features and Benefits

Specified specimen size: Designed for casting rectangular concrete beam specimens with the required nominal dimensions.
Rigid construction: Beam moulds are commonly manufactured from cast iron or mild steel, depending on the model.
Reusable design: Suitable for repeated laboratory use when properly cleaned, handled, and maintained.
Consistent specimen preparation: A properly maintained mould helps produce specimens with repeatable shapes and dimensions.
Practical handling: A detachable or assembled plate design can simplify specimen removal, depending on the model supplied.
Laboratory suitability: Useful for concrete testing laboratories, engineering colleges, RMC facilities, and construction quality control teams.

Confirm the material, assembly arrangement, surface finish, and dimensional tolerances with the product datasheet before ordering.

Applications of the Beam Mould

The 150 x 150 x 700 Beam Mould in Rohtak can be used in applications where the specified concrete beam dimensions are required for flexural testing. Typical users include:

Civil engineering and construction material testing laboratories.
Concrete quality control departments.
Ready-mix concrete plants.
Highway, road, and infrastructure projects.
Engineering colleges and technical training institutions.
Research facilities conducting concrete performance studies.

The mould is used to prepare the specimen; the actual flexural-strength result is determined by the applicable test procedure and testing equipment.

Technical Specifications

Parameter	Details
Product name	150 x 150 x 700 Beam Mould
Nominal specimen dimensions	150 mm × 150 mm × 700 mm
Primary application	Casting concrete beam specimens
Testing purpose	Concrete flexural-strength testing
Typical construction material	Cast iron or mild steel, depending on model
Construction	As per the supplied model
Base plate	Confirm configuration with supplier
Applicable standard	Verify the relevant standard and edition before use
Accessories	Confirm availability when requesting a quotation

These details describe the product category and intended application. Exact construction, dimensional tolerances, supplied accessories, and conformity documentation should be confirmed for the selected model rather than assumed.

150 x 150 x 700 Beam Mould Manufacturer in Rohtak

Choosing a 150 x 150 x 700 Beam Mould Manufacturer in Rohtak helps laboratories and construction businesses source equipment suited to their specimen preparation requirements. Before placing an order, buyers should confirm the mould's internal dimensions, material, finish, assembly method, and suitability for the required testing standard.

Civil Testing Equipment supports customers looking for concrete and civil engineering testing equipment. Share your required quantity and technical requirements to help establish the appropriate product configuration.

150 x 150 x 700 Beam Mould Supplier in Rohtak

A reliable 150 x 150 x 700 Beam Mould Supplier in Rohtak should provide clear product information and help customers verify the details that matter for their laboratory work. This includes confirming the nominal specimen size, construction material, base plate arrangement, and availability of relevant documentation.

When sourcing from a 150 x 150 x 700 Beam Mould Supplier in Rohtak, customers should also clarify packaging, delivery timelines, order quantities, and any specific purchasing requirements before confirming the order.

150 x 150 x 700 Beam Mould Distributor in Rohtak

Working with a 150 x 150 x 700 Beam Mould Distributor in Rohtak can help purchasing teams coordinate equipment procurement for laboratories, educational institutions, and construction projects. A clear quotation should identify the product, selected configuration, quantity, and any applicable delivery or documentation terms.

For planned laboratory installations or repeat purchases, confirm the mould dimensions and model details before ordering. This helps reduce the risk of receiving equipment that does not match the intended test procedure.

150 x 150 x 700 Beam Mould Exporter in Rohtak

Businesses sourcing equipment for international projects may require a 150 x 150 x 700 Beam Mould Exporter in Rohtak that can clarify product specifications, packing arrangements, shipping requirements, and available export documentation.

For export enquiries, provide the destination country, required quantity, preferred material if specified, and applicable testing requirements. Export availability and documentation should be confirmed before the order is finalized.

Selection, Use, and Maintenance

Before purchasing, verify that the mould dimensions match the requirements of your test method. Also check the construction material, rigidity, internal surfaces, plate alignment, and base plate configuration. If the laboratory follows a particular standard, confirm the applicable edition and specimen requirements before selecting the mould.

During use, assemble the mould securely on a stable surface and prepare it according to the relevant testing procedure. Use an appropriate mould-release agent when required, place and compact the concrete as specified, and level the exposed surface carefully. Follow the prescribed procedure for setting, demoulding, identification, curing, and testing of specimens.

After use, remove concrete residue without damaging the mould surfaces. Clean and dry the components before storage, inspect for corrosion or distortion, and ensure that all parts fit correctly before reuse. Proper maintenance supports consistent specimen preparation and helps extend the service life of the equipment.

Why Choose Civil Testing Equipment?

Civil Testing Equipment supplies testing equipment for civil engineering, construction material assessment, and laboratory applications. When enquiring about the 150 x 150 x 700 Beam Mould in Rohtak, customers can share their intended application, required quantity, and technical specifications to clarify product suitability before purchasing.

Our team can assist with product enquiries and quotation requests for concrete testing equipment. Buyers should request confirmation of model-specific specifications, material, included components, availability, and delivery details before finalizing an order.

Get a Quote

For pricing and availability, contact Civil Testing Equipment with your required mould size, quantity, and any applicable testing-standard requirements.

Phone: +91-8826549585

Email: civiltestingequipment@gmail.com

Frequently Asked Questions

1. What is a 150 x 150 x 700 Beam Mould used for?

A 150 x 150 x 700 Beam Mould Manufacturer in Rohtak can help buyers identify moulds intended for casting concrete beam specimens for flexural-strength testing. The mould's dimensions should match the test procedure being followed.

2. What material is used to make this beam mould?

Beam moulds are commonly available in cast iron or mild steel, depending on the product model. Confirm the material and finish in the quotation before ordering.

3. How can I purchase from a 150 x 150 x 700 Beam Mould Supplier in Rohtak?

Contact Civil Testing Equipment with the required dimensions, quantity, and intended application. Confirm the available configuration, price, and delivery details before placing an order.

4. What should I check before ordering from a 150 x 150 x 700 Beam Mould Distributor in Rohtak?

Verify the internal specimen dimensions, construction material, base plate arrangement, surface condition, and suitability for the required test standard. Also confirm the supplied components and documentation.

5. Can I enquire about export orders for this product?

Yes, you can submit an export enquiry by specifying the destination, quantity, packaging needs, and documentation requirements. A 150 x 150 x 700 Beam Mould Exporter in Rohtak should confirm export availability and shipping terms before order confirmation.

6. How should the beam mould be maintained?

Clean the mould after use, remove concrete residue carefully, dry the components, and inspect for corrosion, distortion, or loose fittings. Store the mould properly and check its condition before preparing the next specimen.

7. Which testing standard should I follow?

Use the standard specified by your project, laboratory, or applicable testing procedure. Confirm the relevant standard and edition before casting specimens, because specimen requirements may vary by method.