100 X 100 X 500 BEAM MOULD in Vasant Kunj
Get In Touch
100 x 100 x 500 Beam Mould in Vasant Kunj
Product Overview
The 100 x 100 x 500 Beam Mould in Vasant Kunj is used to cast concrete beam specimens for flexural strength testing. It is an important accessory for concrete-testing laboratories, construction quality-control departments, civil engineering institutions and infrastructure projects. The mould forms a rectangular concrete specimen with the dimensions required by the applicable testing procedure.
This beam mould is commonly manufactured from cast iron or mild steel, depending on the design. A typical assembly consists of rigid side plates and a base plate that hold the concrete in the required shape during casting and initial setting. Properly finished internal faces help produce consistent specimens for subsequent testing.
Civil Testing Equipment supports buyers looking for concrete-testing equipment for laboratory and construction applications. Before purchasing, confirm the mould material, internal dimensions, surface finish, assembly design and compatibility with the required testing standard.
Purpose of a Concrete Beam Mould
Concrete beam specimens are used to assess flexural strength, which indicates the ability of concrete to resist bending stresses. The mould provides the shape and dimensions needed to prepare a specimen for testing in a suitable flexural testing machine.
The 100 x 100 x 500 Beam Mould in Vasant Kunj is intended for casting specimens with a nominal cross-section of 100 mm by 100 mm and a length of 500 mm. The required dimensions should always be checked against the relevant test method and the laboratory's testing requirements.
Consistent mould dimensions and proper specimen preparation are important because variations in shape can affect the reliability and comparability of test results. The mould should be assembled securely, placed on a stable surface and checked for leakage before concrete is poured.
Key Features and Benefits
Rigid Construction
A robust metal construction helps maintain the mould's shape during filling and compaction. The actual material and design should be confirmed for the supplied model.
Defined Specimen Dimensions
The mould is designed to form a rectangular beam specimen of the required nominal size. Confirm the internal dimensions rather than relying only on external measurements.
Removable Assembly
Many beam moulds use separate side plates assembled with a base plate. This arrangement can simplify specimen removal after the concrete has hardened sufficiently.
Machined Internal Faces
Smooth, accurately finished internal surfaces support consistent specimen formation. Ask the supplier for the dimensional tolerances of the offered model.
Reusable Laboratory Equipment
With appropriate cleaning, handling and maintenance, a metal beam mould can be reused for routine specimen preparation.
Practical Specimen Preparation
A suitable mould helps laboratories prepare concrete beams for flexural testing according to the prescribed casting, compaction, curing and testing procedures.
Applications of 100 x 100 x 500 Beam Mould
The mould is commonly used for:
-
Casting concrete beam specimens for flexural strength testing.
-
Preparing samples for construction-material quality-control laboratories.
-
Concrete testing at ready-mix concrete plants.
-
Laboratory work in civil engineering colleges and technical institutions.
-
Quality assessment for concrete used in buildings, roads and infrastructure projects.
-
Research and comparative testing of concrete mixtures.
The 100 x 100 x 500 Beam Mould in Vasant Kunj is suitable for laboratories that require this specimen size under their specified testing procedure. Always confirm that the mould dimensions correspond to the standard and flexural testing arrangement used by your facility.
Technical Specifications to Confirm
| Parameter | Details |
|---|---|
| Product type | Concrete beam mould |
| Nominal specimen size | 100 x 100 x 500 mm |
| Primary application | Casting specimens for flexural strength testing |
| Construction material | Cast iron or mild steel, depending on model |
| Mould assembly | Side plates with a base plate, depending on design |
| Internal surface | Confirm machining and finish |
| Dimensional tolerance | Verify against the product datasheet and applicable standard |
| Demoulding arrangement | Confirm clamps, bolts or other fasteners supplied |
| Accessories | Tamping bar, mould oil and cleaning brush may be separate |
| Applicable standard | Confirm the relevant edition of IS 10086 and the associated specimen-testing method |
Specifications can vary between manufacturers and product designs. Request the current datasheet to verify dimensions, material, tolerance, assembly and included accessories before placing an order.
100 x 100 x 500 Beam Mould Manufacturer in Vasant Kunj
When comparing a 100 x 100 x 500 Beam Mould Manufacturer in Vasant Kunj, check the mould's internal dimensions, construction material, surface finish and assembly quality. These factors help determine whether the mould is suitable for producing specimens according to your laboratory's testing procedure.
Civil Testing Equipment helps buyers identify concrete-testing equipment based on their application requirements. Before ordering, request the product specifications, dimensional tolerances, details of the base plate and a list of included components. This information supports an informed purchasing decision.
100 x 100 x 500 Beam Mould Supplier in Vasant Kunj
Choosing a 100 x 100 x 500 Beam Mould Supplier in Vasant Kunj involves confirming that the offered mould matches your required specimen dimensions and test method. Buyers should check whether the mould is supplied with its base plate and whether fasteners or other assembly components are included.
Compare quotations for material, finish, delivery, warranty terms and technical documentation. If your laboratory requires accessories such as a tamping bar or mould oil, confirm whether these items are included or must be purchased separately.
100 x 100 x 500 Beam Mould Distributor in Vasant Kunj
A 100 x 100 x 500 Beam Mould Distributor in Vasant Kunj should provide clear information about the supplied model and its intended application. Verify the internal specimen size, mould material, plate arrangement and demoulding method before confirming the order.
It is also useful to ask about replacement components and cleaning recommendations. Written confirmation of the supplied configuration helps laboratories compare products and plan equipment purchases more effectively.
100 x 100 x 500 Beam Mould Exporter in Vasant Kunj
When evaluating a 100 x 100 x 500 Beam Mould Exporter in Vasant Kunj, international buyers should confirm the product dimensions, material, packaging and shipping arrangements. The mould must be compatible with the specimen requirements of the testing procedure used in the destination country.
Ask for a technical datasheet and a clear list of supplied components. Confirm whether the base plate and assembly fasteners are included, and check any documentation required for the shipment before dispatch.
How to Use and Maintain a Beam Mould
Before casting, clean the mould and inspect the internal faces, joints and base plate. Assemble the components securely and place the mould on a firm, level surface. Apply a suitable release agent if required by the testing procedure, avoiding excess material that could affect the specimen surface.
Fill and compact the concrete according to the relevant test method. Level the top surface and follow the prescribed curing and demoulding procedure. After use, remove concrete residue, clean the components and dry them appropriately before storage.
The 100 x 100 x 500 Beam Mould in Vasant Kunj should be inspected regularly for wear, corrosion, loose fasteners, damaged edges and changes in internal dimensions. Replace damaged components when necessary to maintain specimen quality.
Why Choose Civil Testing Equipment?
Civil Testing Equipment supports buyers looking for concrete and construction-material testing equipment for laboratories, educational institutions and quality-control teams. Product selection should be based on the required specimen dimensions, material, finish and applicable testing method.
When requesting a quotation, share your preferred material, quantity, testing standard and accessory requirements. This helps clarify the product configuration needed for your application.
Get a Quote
Contact Civil Testing Equipment for product details, pricing and configuration assistance.
Phone: +91-8826549585
Email: civiltestingequipment@gmail.com
Frequently Asked Questions
What is a 100 x 100 x 500 Beam Mould used for?
It is used to cast rectangular concrete beam specimens for flexural strength testing, provided that the specimen dimensions match the applicable test procedure.
What should I check with a 100 x 100 x 500 Beam Mould Manufacturer in Vasant Kunj?
Confirm the internal dimensions, material, surface finish, dimensional tolerances, base plate and assembly components.
How do I choose a 100 x 100 x 500 Beam Mould Supplier in Vasant Kunj?
Compare the product specifications, included components, delivery terms, warranty conditions and suitability for your testing standard.
What should I confirm with a 100 x 100 x 500 Beam Mould Distributor in Vasant Kunj?
Ask for the model datasheet, mould material, specimen dimensions, demoulding arrangement and availability of replacement components.
What should international buyers ask a 100 x 100 x 500 Beam Mould Exporter in Vasant Kunj?
Confirm the product dimensions, material, packaging, included accessories, shipping arrangements and required documentation.
Which material is used to make a concrete beam mould?
Beam moulds are commonly available in cast iron or mild steel, depending on the product design. Confirm the actual material offered before purchase.
Does the beam mould measure concrete flexural strength?
No. The mould is used to prepare the concrete specimen. Flexural strength is measured separately by testing the cured beam in a suitable flexural testing machine.