Density Basket in Vasant Kunj – Aggregate Testing Equipment

The Density Basket in Vasant Kunj is a laboratory testing accessory used for determining the relative density, specific gravity, and water absorption of coarse aggregates by the water-displacement method. It is designed to hold an aggregate sample while the sample container is suspended in water during submerged weighing.

ASTM C127 covers the determination of relative density and absorption of coarse aggregates and specifies a wire basket or suitable sample container for submerged weighing. The standard currently listed by ASTM is C127-25.

Civil Testing Equipment can supply information for the Density Basket in Vasant Kunj according to the required aggregate testing method, basket size, mesh opening, and laboratory configuration.

Density Basket Manufacturer in Vasant Kunj

A Density Basket Manufacturer in Vasant Kunj should provide a basket suitable for the intended aggregate testing application, with construction that allows the sample to be submerged without unnecessary air trapping.

ASTM C127 specifies a wire basket of 3.35 mm (No. 6) mesh or finer, or a bucket of approximately equal breadth and height. For aggregate with a nominal maximum size of 37.5 mm or smaller, the standard specifies a 4–7 L container capacity, with larger containers used where required.

The Density Basket Manufacturer in Vasant Kunj should therefore confirm the actual basket dimensions, mesh opening, material, and intended aggregate size before quotation.

Density Basket Supplier in Vasant Kunj

As a Density Basket Supplier in Vasant Kunj, the product should be selected according to the balance, water tank, aggregate size, and applicable testing procedure.

A typical setup consists of the basket, suspension arrangement, suitable weighing balance, and water tank. The basket needs to be suspended below the balance during submerged weighing. ASTM C127 also requires the sample container to be constructed so that it does not trap air when submerged.

The Density Basket Supplier in Vasant Kunj can discuss the required configuration based on the laboratory's testing standard and sample size.

Density Basket Exporter in Vasant Kunj

For international procurement, the Density Basket Exporter in Vasant Kunj should confirm the required basket configuration, destination, quantity, packaging, and documentation before shipment.

Export capability should be confirmed according to the actual commercial supply arrangement. Buyers should provide the applicable standard and required basket dimensions so the correct configuration can be quoted.

Density Basket Distributor in Vasant Kunj

A Density Basket Distributor in Vasant Kunj can support laboratories, aggregate-testing facilities, road contractors, construction companies, and civil engineering institutes requiring submerged weighing accessories.

The correct basket depends on aggregate size and testing procedure. Available commercial configurations can vary in diameter, height, mesh opening, and material, so the buyer should confirm the actual model before purchase.

Technical Specifications

The following specifications are standard-based requirements or common configurations, not guaranteed specifications of every supplied model.

ASTM C127-25 specifies that the balance should be readable and accurate to 0.05% of sample mass or 0.5 g, whichever is greater, and should permit suspension of the sample container in water.

Main Features

The Density Basket in Vasant Kunj can provide:

• Suitable basket for coarse-aggregate testing

• Open mesh construction for water penetration

• Suspension arrangement for submerged weighing

• Stainless-steel configurations where specified

• Multiple basket sizes available in commercial configurations

• Useful for specific-gravity testing

• Suitable for water-absorption testing

• Practical for civil engineering laboratories

• Designed for repeated laboratory use

• Configuration based on aggregate size and test method

Applications

The Density Basket in Vasant Kunj is used for:

• Coarse aggregate specific-gravity testing

• Water absorption testing

• Aggregate quality control

• Road construction material testing

• Concrete aggregate evaluation

• Civil engineering laboratory work

• Construction material research

• Educational laboratory testing

ASTM C127 distinguishes oven-dry, saturated-surface-dry, and apparent relative density and uses the test results for calculations involving aggregate volume and concrete or bituminous-concrete mixtures.

Standards and Technical Accuracy

The main standard associated with this application is ASTM C127-25 – Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate.

The basket itself should not automatically be described as “ASTM certified.” Instead, the product should be supplied/configured to meet the applicable apparatus requirements of the specified test method.

Other standards may be applicable depending on the project or laboratory, so buyers should provide their required standard before ordering.

Actual Product Configuration

For strong E-E-A-T and better conversion, the product page should display actual photographs of the supplied Density Basket.

Recommended images:

• Complete basket with handle/suspension wire

• Close-up of stainless-steel mesh

• Basket dimensions with measurement reference

• Basket shown with actual water tank, if supplied

• Complete accessory set

• Product identification/model plate, where available

Do not publish dimensions, mesh size, material grade, weight, or accessories as guaranteed product specifications unless they are confirmed from the actual product datasheet.

How to Select the Right Density Basket

Before purchasing, confirm:

1. Aggregate size – Select a basket suitable for the maximum aggregate size.

2. Mesh opening – Confirm the required mesh against the applicable test method.

3. Basket capacity – Check whether the container can hold the required sample.

4. Material – Confirm stainless steel or other required construction.

5. Suspension system – Ensure compatibility with the weighing balance.

6. Water tank – Confirm the basket can be completely submerged without trapping air.

7. Testing standard – Provide ASTM or other applicable standard before quotation.

Quality and Procurement Checks

For a Density Basket Supplier in Vasant Kunj, buyers should verify:

• Actual basket dimensions

• Mesh opening

• Construction material

• Suspension arrangement

• Product weight

• Applicable standard

• Supplied accessories

• Actual product photographs

• Technical datasheet

• Inspection/documentation requirements

This prevents standard requirements from being incorrectly presented as the manufacturer's own product specifications.

Why Choose Civil Testing Equipment?

Civil Testing Equipment can provide specification-based information for aggregate testing equipment and accessories.

For buyers searching for a Density Basket Distributor in Vasant Kunj, the focus should be on matching the basket to the aggregate size, balance arrangement, water tank, and applicable testing procedure.

Manufacturer, supplier, distributor, and exporter descriptions should be used according to the actual commercial role and supply capability for the specific order.

Get a Quote

If you need a Density Basket in Vasant Kunj, share the aggregate size, required basket dimensions, mesh opening, quantity, applicable standard, and delivery location.

Phone: +91-8826549585
Email: civiltestingequipment@gmail.com

Frequently Asked Questions

1. What is a Density Basket?
A Density Basket is a wire basket used to hold coarse aggregate during submerged weighing for specific-gravity and water-absorption testing.

2. Which standard is used for Density Basket testing?
ASTM C127-25 covers relative density and absorption testing of coarse aggregate and specifies requirements for the sample container used in submerged weighing.

3. What mesh size is required?
ASTM C127 specifies a wire basket with 3.35 mm (No. 6) or finer mesh for the applicable sample-container configuration.

4. What is the typical basket capacity?
For aggregate with a nominal maximum size of 37.5 mm or smaller, ASTM C127 specifies a 4–7 L container; larger aggregate requires an appropriately larger container.

5. Can I buy a Density Basket in Vasant Kunj?
Yes. The Density Basket Supplier in Vasant Kunj can discuss the required size, mesh, material, and testing configuration.

6. Is a water tank required?
A suitable water tank is required for the submerged weighing arrangement used in the ASTM C127 procedure.

7. Can the basket be used with an electronic balance?
Yes, where the balance has a suitable suspension arrangement and meets the applicable test-method requirements.

8. How do I order the correct basket?
Provide the aggregate size, mesh requirement, basket capacity/dimensions, applicable standard, quantity, and delivery location before ordering.